Adafruit Component Assistant

Description

LEDs and passives and transistors and switches and op-amps oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.

Kit Contents:

Prototyping:

• 1x – Storage box with latch
• 1x – Half-size breadboard
• 20x – Male/male jumper wires – 3″ (75mm)
• 10x – Male/male jumper wires – 6″ (150mm)

LEDs:

• 5x – 5mm Diffused green LEDs
• 5x – 5mm Diffused red LEDs
• 1x – 10mm Diffused Common-Anode RGB LED

Capacitors:

• 10x – 1.0uF Ceramic capacitors
• 10x – 0.1uF Ceramic capacitors
• 10x – 0.01uF Ceramic capacitors
• 5x – 10uF 50V Electrolytic capacitors
• 5x – 100uF 16V Electrolytic capacitors

Resistors:

• 10x – 560 ohm 5% axial resistors
• 10x – 1K ohm 5% axial resistors
• 10x – 10K ohm 5% axial resistors
• 10x – 47K ohm 5% axial resistors

Semiconductors:

• 5x – 1N4001 Diodes
• 5x – 1N4148 Signal Diodes
• 5x – NPN Transistor PN2222 TO-92
• 5x – PNP Transistor PN2907 TO-92
• 2x – 5V 1.5A Linear voltage regulator – 7805 TO-220
• 1x – 3.3V 800mA Linear voltage regulator – LD1117-3.3 TO-220
• 1x – TLC555 wide-voltage range, low-power 555 Timer
• 1x – LM358 Dual operational Amplifier

Sensors:

• 1x – Photocell
• 1x – Thermistor (Breadboard version)
• 1x – Vibration sensor switch
• 1x – 10K Breadboard trim potentiometer
• 1x – 1K Breadboard trim potentiometer

Mechanical:

• 1x – Piezo buzzer
• 5x – 6mm Tactile switches
• 3x – SPDT slide switches
• 1x – 40-pin Break-away male header strip
• 1x – 40-pin female header strip

Technical Details:
Revision history

As of July 20, 2016 we now include an LM358 dual opamp!

Datasheets:

• TLC555
• LM358
• PN2222A
• MPS2907A
• LD1117
• L7805CV
• Eletrolytic Capacitor

• Thermistor
  • Resistance at 25 degrees C: 10K +- 1%
  • B25/50 = 3950+- 1%
  • Thermal time constant <= 15 seconds
  • Thermistor temperature range -55 °C to 125 °C

Explore more from our collection.